Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #0: Fri Sep 5 22:57:28 IRDT 2003 root@heaven.datak.net:/usr/obj/usr/src/sys/FUJITSU Preloaded elf kernel "/boot/kernel/kernel" at 0xc048b000. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.70GHz (1694.73-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 Features=0x3febf9ff real memory = 251592704 (239 MB) avail memory = 239382528 (228 MB) Pentium Pro MTRR support enabled VESA: v3.0, 15296k memory, flags:0x1, mode table:0xc03f46a2 (1000022) VESA: S3 Graphics ProSavage DDR Family BIOS npx0: on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 Using $PIR table, 6 entries at 0xc00fe840 apm0: on motherboard apm0: found APM BIOS v1.2, connected at v1.2 pcib0: at pcibus 0 on motherboard pci0: on pcib0 pci_cfgintr: 0:10 INTA BIOS irq 11 pci_cfgintr: 0:10 INTB routed to irq 11 pci_cfgintr: 0:12 INTA BIOS irq 10 pci_cfgintr: 0:13 INTA BIOS irq 10 pci_cfgintr: 0:17 INTD BIOS irq 10 pci_cfgintr: 0:17 INTD BIOS irq 10 pci_cfgintr: 0:17 INTD BIOS irq 10 pci_cfgintr: 0:17 INTC BIOS irq 10 pci_cfgintr: 0:17 INTC BIOS irq 10 agp0: mem 0xa0000000-0xa3ffffff at device 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci_cfgintr: 1:0 INTA BIOS irq 11 pci1: at device 0.0 (no driver attached) cbb0: irq 11 at device 10.0 on pci0 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: irq 11 at device 10.1 on pci0 cardbus1: on cbb1 pccard1: <16-bit PCCard bus> on cbb1 fwohci0: vendor=104c, dev=8026 fwohci0: <1394 Open Host Controller Interface> mem 0xf0004000-0xf0007fff,0xf0000000-0xf00007ff irq 10 at device 12.0 on pci0 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:00:0e:10:00:05:64:6a fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) rl0: port 0xe000-0xe0ff mem 0xf0008000-0xf00080ff irq 10 at device 13.0 on pci0 rl0: Ethernet address: 00:e0:00:98:65:b3 miibus0: on rl0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto viapropm0: SMBus I/O base at 0x1400 viapropm0: port 0x1400-0x140f at device 17.0 on pci0 viapropm0: SMBus revision code 0x0 smbus0: on viapropm0 smb0: on smbus0 atapci0: port 0x1100-0x110f at device 17.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: port 0x1200-0x121f irq 10 at device 17.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: A4Tech USB Optical Mouse, rev 1.10/0.01, addr 2, iclass 3/1 ums0: 7 buttons and Z dir. uhci1: port 0x1300-0x131f irq 10 at device 17.3 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x1700-0x171f irq 10 at device 17.4 on pci0 usb2: on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcm0: port 0xe100-0xe1ff irq 10 at device 17.5 on pci0 pcm0: pci0: at device 17.6 (no driver attached) isa0: on motherboard orm0: